Subaru Outback Key Won't Turn

Subaru Outback offers one keyless entry system option with a built-in keyless entry system on newer models. Some keys may need to be programmed by a locksmith or dealer. Relevant information regarding Subaru Outback key replacement options and costs can be found below.

Subaru Outback Key Won't Turn

Check the battery of the key fob.

What are your options for replacing a Subaru Outback key fob battery?

The common replacement options for a Subaru Outback key fob battery are the CR2032 3V and CR2025 3V batteries. These batteries are frequently used for this purpose and are readily available.

Where can I buy a replacement battery for my Subaru key fob?

You can purchase a replacement battery for your Subaru key fob at a local convenience or grocery store. It's a simple process that you can do yourself without having to visit a garage or shop. To access the battery, you can utilize the small trick of removing the glove box key by pushing the silver button and using it to open a small slot that is revealed.

How do you replace a key fob battery?

To replace the battery in your jeep key fob, first gather a screwdriver and new battery. Next, gently pry open the key fob using the screwdriver and remove the old battery. Install the new battery and reattach the two halves of the key fob. Lastly, test the battery by clicking the lock button.

Make sure the steering wheel isn't locked.

Why is my Subaru steering wheel locked?

The probable reason why your Subaru steering wheel is locked is due to an anti-theft measure installed in Subarus that may have been unintentionally activated, potentially by turning the wheel too far while parking or by turning it without the ignition key in place.

Why do steering wheels lock when there is no key?

In accordance with safety measures, steering wheels are configured to lock automatically in the absence of a key to secure the vehicle from moving without authorization and to reduce the likelihood of theft.

Do Subarus require muscle?

Subarus may require muscle to turn the steering wheel at times, as the engine needs to be running to do so easily, which creates a catch 22 situation. However, this property seems to be common among Subarus.

What should I do if my steering wheel lock is stuck?

To fix a locked steering wheel, start the engine to disengage the steering wheel lock, then check that the engine will start and the lock will disengage before securing the steering column and plastic cover. Insert the key and turn it while applying pressure to the wheel to unlock the pin.

Verify that the key is the correct one for the car.

How do I protect my Subaru Outback key fob?

A key fob cover or case can be beneficial for protecting your Subaru Outback key fob and extending its battery life. Online orders for this product are available. This website is a complimentary service designed to connect homeowners with local service contractors.

Why is my car not detecting the key fob?

There may be a few possible explanations for why a car is failing to detect the key fob. Commonly, a low battery in the key fob could be the root cause of the glitch, as it obstructs signals from reaching the keyless entry system. In such a situation, using a spare key fob, if available, to access the vehicle and ignite the engine may be a practical solution.

Try wiggling the key while turning it.

Why is my Outback key not working?

Repeated use or manipulation of the steering wheel in a Subaru Outback can cause the key to become unbound or bent. In the latter case, a new key will be needed, especially if the original key is a cheap duplicate. If the key is stuck in the ignition, it's best to massage it out and replace it with a good key, which can be duplicated.

Can You duplicate a Subaru Outback key?

Subaru can cut you a new OEM key using the VIN number if you do not have a key to duplicate, but you need to prove ownership. The ignition lock cylinder of the Subaru Outback can deteriorate over time and cause key stuck issues.

Why is my car key not turning?

If your car key isn't turning in the ignition, it could be due to damage to the key's teeth or excessive wear. These issues can prevent the key from engaging the necessary pins to turn the cylinder. It's important to inspect the key for signs of damage, such as rounded or broken teeth, which can cause it to fail in the ignition. To resolve the issue, try any of the three ways to fix an ignition key that doesn't turn.

What if I don't have a Subaru key?

If you don't have a Subaru key to duplicate, some manufacturers can create a new OEM key using the VIN number. However, it is crucial to show ownership proof to Subaru.

Check for debris or dirt in the keyhole.

What are Subaru access key fobs?

Subaru access key fobs are remote controls or 'clickers' that come in three different styles and include a mechanical key. Style 1 has a rectangular shape and a release catch on the mechanical key that is located near the key ring hole.

How to start a Subaru?

To start a Subaru, one must hold the Access Key against the Start/Stop ignition switch with the buttons facing out towards them. Once held there, both the vehicle and the Access Key will communicate with each other for a short period of time, after which a chime or 'ding' will indicate the starting process is complete. This process is consistent for all styles of Access Key.

Why is my car key not opening the car door?

There are various reasons why your car key may not open the car door. One of the most common reasons is a lack of lubrication, which can be due to prolonged use or exposure to rain.

Lubricate the keyhole with graphite.

How do you lubricate a keyhole lock?

To lubricate a keyhole lock, spray a dry lock lubricant, such as 3-in-one lock dry lube, into the keyhole. Afterwards, insert your key and move it around to spread the lubricant into the lock to avoid dust accumulation.

Can you use graphite to lubricate a lock?

Locksmiths have relied on powdered graphite as a lubricant for locks, making it a possible option for those experiencing problems with their keys. Instead of purchasing the product, there is a more affordable method available for those in a bind.

How do you fix a broken key?

The article discusses a simple technique to lubricate a lock using graphite powder to ease the workings of the lock, but it doesn't provide any information about fixing a broken key.

What causes an ignition fuse to blow?

Ignition fuses blow due to a number of factors including a failed ignition system, ancillary faults or wiring and computer faults. The problem is often found in the ignition switch or cables connected to the system, or with the motorized components in the vehicle's ignition system. It is important to check all wires thoroughly to determine the cause of the problem.

How do I know if my car Fuse has blown?

To determine if a car fuse has blown, one should check for a broken filament or discoloration. This can be done by holding up the fuse to the light and inspecting the thin wire that connects the two sides of the fuse for any breakage or charred marks. It may be more difficult to detect blown car fuses due to their small size.

How to test a Subaru Outback battery?

To measure the voltage of a Subaru Outback battery, use a multimeter to connect the plus and minus poles of the battery after setting the tool to the voltage range of the battery. The test would indicate values of approximately 12 to 13 volts for a successful procedure.

Why is my Subaru Outback not starting?

Possible summary: Subaru Outback owners may encounter starting issues due to rodent damage, which can affect various vehicle systems by biting through cables and wires. Checking the engine compartment can reveal the damage, which may require repairs to the fuel supply, oil supply, or power supply. To fix the problem, one may need to address the rodents as well as the damaged parts.

Verify that the car is in park or neutral.

Why does my Car start in neutral but not in Park?

The car may start in Neutral but not in Park due to an issue with the transmission range switch. This switch may not confirm that the transmission is in Park, resulting in the vehicle starting in Neutral instead. Another potential issue could be an electrical problem with the sliding electrical contacts inside the transmission range switch. It is important to address these issues promptly to ensure proper functioning of the vehicle.

What does the p0852 Subaru code mean?

The P0852 Subaru code indicates a problem with the Park/Neutral Position Switch Circuit. This switch is connected to the engine starter circuit and notifies the ECM whether the vehicle is in park or neutral. If the switch is not in these positions, the engine will not start.

Why is my Subaru Outback one start in no power?

If your Subaru Outback is not producing any power during startup, it could be due to a faulty spark plug. This issue can cause the engine to fail to start altogether. In some cases, jumpstarting the vehicle may not resolve the issue if the problem is not related to the battery. It is important to diagnose the specific cause of the problem to resolve it effectively.

How do I know if my transmission is in Park or neutral?

Your vehicle's automatic transmission has a transmission range switch or sensor that detects whether the transmission is in Park or Neutral position for safety reasons. This switch is typically located on the transmission and is also known as a neutral safety switch.

Replace the ignition switch.

How much does it cost to replace ignition switch?

The estimated cost of replacing an ignition switch, according to mechanics or locksmiths, ranges from $190 to $240.

How do you change an ignition switch?

The ignition switch is located at the bottom of the steering column inside the car, underneath the dashboard. There is a rod that comes down from the key calender to the ignition switch. To replace the switch, remove the two screws holding it on and the wire connector. Make sure the rod goes back into the same hole on the new switch.

How to disassemble ignition switch?

To disassemble an ignition switch, you must disconnect the battery ground, remove the steering wheel, turn signal lever, and column trim shrouds. Then, unbolt the steering column and lower it carefully. After that, remove the ignition switch, warning buzzer, and pin the switch in the LOCK position. Finally, remove the turn signal switch.

Do I need a new ignition switch?

Possible summary: Possible summary: Ignition switch problems can arise from worn contacts, temperature issues, or broken springs, causing the switch to malfunction and prevent car starting. When driving, faulty switch contacts may also shut down the engine, posing risks. Thus, if you experience these symptoms, you may need to have your ignition switch checked and replaced if necessary.

Consider calling a professional locksmith or mechanic.

Does Subaru Outback have keyless entry?

Subaru Outback offers one keyless entry system option with a built-in keyless entry system on newer models. Some keys may need to be programmed by a locksmith or dealer. Relevant information regarding Subaru Outback key replacement options and costs can be found below.

Does my Subaru need a key fob replacement?

If your Subaru model requires the latest key technology upgrade, it is possible that you might need a key fob replacement, which is a service that programmers provide.

How many versions of the Subaru Outback are there?

The Subaru Outback model has three versions - Subaru Outback w/Prox, Subaru Outback w/o Prox, and Subaru Outback (Canada).

Author Photo
Reviewed & Published by Albert
Submitted by our contributor
Tire Category